Cara Mudah Update Manual Firmware Xiaomi Mi Drone 4K – Currently Xiaomi Mi Drone provides a firmware update for their Xiaomi Mi Drone, attainable on both iOS and Android by using the Mi Drone App. The Xiaomi Mi Drone update optimizes system performance and adds new functions to your Xiaomi Mi Drone.

The easiest way to update the firmware is through the Mi Drone App, along with the remote command and aircraft. Here are the Instructions for updating the firmware manually.

Annotation : There are some problems on the 1066. If the app shows a grayness screen after the firmware update information technology's expected to update the 1065.

Firmware Update

  • Added Camera Settings include contrast, sharpness, saturation, white remainder.
  • Fixed no response when taking DNG photos.
  • Change the measurement mode to average.
  • Optimized video manual when Camera is connected to Drone.
  • Fixed freezing issue when inbound Media Library.

Previous update Update

  • Increase bit rate to 1080P/60 and 1080P/30
  • Optimize Camera TF card office
  • Optimized main stream result manner 4K fashion, optimized paradigm quality two.5K, 1080P30, 1080P60, optimized machine white balance
  • Low probability solved of camera trouble

Mi Drone App update steps


ane. Actuate Mi Drone completely, and format your TF card with Mi Drone App.
2. Open the App, Become to Settings

3. Select Camera Settings

4. Select TF Card Format. (Notation that the files in the TF card volition exist deleted subsequently the format behavior)

5. Plow off Mi Drone, remove TF bill of fare from Camera.
half-dozen. Download the installed Camera Firmware package and unzip information technology;
seven. Copy the firmware.bin file to the root directory of the TF bill of fare.

ATTENTION : For 1065 and 1066, need firmware.bin file and update.txt file to TF card root directory at the same time.

8. Insert the TF card into the Camera slot, and turn on the Mi Drone.
9. Bank check the camera'south red and white light status:

ATTENTION : Update fourth dimension is nigh 2 minutes.

  • If the red light is e'er bright, and the white light is always vivid or flashing slowly, it means that the camera has started unremarkably.
  • After iii-5s from camera start, red light flash / white lite at the same time means that camera has started called-for firmware via TF carte du jour, please don't plough off Mi Drone while burning firmware.
  • When the burning procedure is complete, the photographic camera's white lite goes out. Look until the blood-red lite is always bright, the white light is always bright or flashes slowly, which means the update is complete.
  • Bank check Camera version in App.

Download Firmware Xiaomi Mi Drone 4K

That's the tutorial How to Easily Update Xiaomi Mi Drone 4K Firmware Transmission, I promise this article is useful and useful for loyal readers of Xiaomi Indonesia. Cheers.